Staple System

Underfloor Heating
Click on the features below and see the highlighted area on the system image
01

Floor screed

02

Foam edge insulation

03

16mm UFH pipe

04

Laminated insulation gridboard (25mm minimum)

05

Tacker staples

06

Acoustic detail (if required)

07

Damp proof membrane (if required)

08

Concrete subfloor

product layers product layer 1product layer 2product layer 3product layer 4product layer 5product layer 6product layer 7product layer 8
01

Floor screed

02

Foam edge insulation

03

16mm UFH pipe

04

Laminated insulation gridboard (25mm minimum)

05

Tacker staples

06

Acoustic detail (if required)

07

Damp proof membrane (if required)

08

Concrete subfloor

System benefits

product benefit

Thanks to the flexibility of the system, its suited for room irregularities. Featuring a magnitude of potential layout designs.

product benefit

The rail provides a readymade pipe spacing to create a perfect and quick installation every time.

product benefit

The insulation board is made from a high strength polypropylene for additional durability and effectiveness

System description

The Staple system is a quick to install and flexible system. Providing an simple yet effective form of heating within a screeded floor build up. The underfloor heating pipework is typically clipped to a laminated EPS sheet, because of its excellent thermal and lightweight properties. The EPS sheet usually has a printed grid to assist the installer achieve a correct pipe spacing, for even heat distribution. Staples are fed from a staple gun securing the pipe to the EPS insulation with an easy repeatable action. Pipe staples are barbed to ensure a secure fixing to the EPS.
Post insulation and pipework installation, the screeding will be scheduled shortly after to avoid leaving the system vulnerable to damage. If a liquid screed is being used, the insulation must first be sealed to provide a watertight base.

Related systems