Plated 30

Underfloor Heating
Click on the features below and see the highlighted area on the system image
01

Plasterboard

02

Timber flooring

03

17mm UFH pipe

04

Aluminium diffuser plate (390mm x 1000mm)

05

Mineral wool/fibre insulation

06

Timber joist

product layers product layer 1product layer 2product layer 3product layer 4product layer 5product layer 6
01

Plasterboard

02

Timber flooring

03

17mm UFH pipe

04

Aluminium diffuser plate (390mm x 1000mm)

05

Mineral wool/fibre insulation

06

Timber joist

System benefits

product benefit

Alike other UFH systems, heat distribution is vital. However our suspended systems push the limits of a level output by, providing a void above the tray.

product benefit

Due to the lack of screed, UKAS Plates are significantly lighter than wet construction systems.

product benefit

Pre-configured, insulated panels that include all the systems components already integrated.

System description

The Plate 30 system is designed for use on joisted floor systems, typically for first floor applications.
Before the system is installed, the joist void should be insulated – typically with a mineral wool type insulation, but also commonly with a ‘board’ type insulation supported by battens. In both cases, it is important that the insulation layer is pushed up tight to the underside of the plates to maximise heat output and minimise downward loss. The reflective properties of the aluminium diffuser plates mean that any heat is efficiently pushed up through the subfloor layers for maximum heat output. The nature of the system means that it has a quicker response that a traditional (screed) UFH system.

Related systems